The cultivation of hemp in the EU is heavily weighted toward fiber production over oilseed production. In 1999, the EU produced about 27,000 t of hemp fiber, but only about 6,200 t of hemp seeds, mostly in France, and 90% of this was used as animal feed (Karus et al. 2000). The seeds (Fig. 33) have traditionally been employed as bird and poultry feed, but feeding the entire seeds to livestock has been considered to be a poor investment because of the high cost involved (although subsidization in Europe allows such usage, especially in France where hemp seeds are not legally permitted in human food). As pointed out later, higher yield and better harvesting practices may make whole hempseed an economical livestock feed. Moreover, seed cake left after expressing the oil is an excellent feed. Efforts are underway in Europe to add value in the form of processed products for hemp, especially cosmetics and food but, as noted below, the North American market is already quite advanced in oilseed applications.
Those warning letters aside, there’s not a lot of federal oversight right now over the claims being made or the products that are being sold. Cohen warned against buying CBD products online, because “there’s a lot of scams out there.” Yet his clinic sells CBD, and he admits, “I say ‘Don’t buy online,’ but ours is worth doing, because we know what we’re doing. We ship all over.”
Based on reviews, smoking or vaporizing CBD vape oil seems to have less effects when compared to other methods of administering CBD, such as tinctures, capsules and sprays. On the flip side, others argue that smoking or vaporizing has less drawbacks than taking CBD orally, since ingesting CBD orally could result in inconsistent absorption and a delayed effect.
Cohen has found that chronic conditions including autoimmune diseases and pain syndromes can be helped with a 6-mg under-the-tongue tincture (the fastest delivery system) or a 25-mg capsule taken twice a day. Dosages for topical products like lotions are especially hard to determine—there’s no clarity on how much CBD gets into the system through the skin.
Canadian experience with growing hemp commercially for the last 4 years has convinced many growers that it is better to use a single-purpose cultivar, seed or fiber, than a dual-purpose cultivar. The recent focus of Canadian hemp breeders has been to develop cultivars with high seed yields, low stature (to avoid channeling the plants’ energy into stalk, as is the case in fiber cultivars), early maturation (for the short growing seasons of Canada), and desirable fatty acid spectrum (especially gamma-linolenic acid).
Success stories like Oliver’s are everywhere, but there’s not a lot of data to back up those results. That’s because CBD comes from cannabis and, like nearly all other parts of the plant, is categorized by the Drug Enforcement Agency (DEA) as a Schedule 1 drug—the most restrictive classification. (Others on that list: heroin, Ecstasy, and peyote.) This classification, which cannabis advocates have tried for years to change, keeps cannabis-derived products, including CBD, from being properly studied in the U.S.
One of the reasons hemp fiber has been valued is because of its length. The primary bast fibers in the bark are 5–40 mm long, and are amalgamated in fiber bundles which can be 1–5 m long (secondary bast fibers are about 2 mm long). The woody core fibers are short—about 0.55 mm—and like hardwood fibers are cemented together with considerable lignin. The core fibers are generally considered too short for high grade paper applications (a length of 3 mm is considered ideal), and too much lignin is present. While the long bast fibers have been used to make paper almost for 2 millennia, the woody core fibers have rarely been so used. Nevertheless it has been suggested that the core fibers could be used for paper making, providing appropriate technology was developed (de Groot et al. 1998). In any event, the core fibers, have found a variety of uses, as detailed below. The long, lignin-poor bast fibers also have considerable potential to be used in many non-paper, non-textile applications, as noted below.
The genus Cannabis was first classified using the "modern" system of taxonomic nomenclature by Carl Linnaeus in 1753, who devised the system still in use for the naming of species. He considered the genus to be monotypic, having just a single species that he named Cannabis sativa L. (L. stands for Linnaeus, and indicates the authority who first named the species). Linnaeus was familiar with European hemp, which was widely cultivated at the time. In 1785, noted evolutionary biologist Jean-Baptiste de Lamarck published a description of a second species of Cannabis, which he named Cannabis indica Lam. Lamarck based his description of the newly named species on plant specimens collected in India. He described C. indica as having poorer fiber quality than C. sativa, but greater utility as an inebriant. Additional Cannabis species were proposed in the 19th century, including strains from China and Vietnam (Indo-China) assigned the names Cannabis chinensis Delile, and Cannabis gigantea Delile ex Vilmorin. However, many taxonomists found these putative species difficult to distinguish. In the early 20th century, the single-species concept was still widely accepted, except in the Soviet Union where Cannabis continued to be the subject of active taxonomic study. The name Cannabis indica was listed in various Pharmacopoeias, and was widely used to designate Cannabis suitable for the manufacture of medicinal preparations.
Fig. 8. Scanning electron micrographs of the abaxial surface of a perigonal bract (which envelops the fruit). These bracts are the most intoxicating part of the plant, and may contain 20% THC, dry weight. The resin is synthesized both in stalked and sessile glands. Multicellular secretory glands (of phallic appearance), some broken stalks of these (note cellular appearance), and unicellular cystolith hairs (claw-like structures) are pictured. Fig. 9. Some important cannabinoids of cannabis resin. D9-THC (delta-9 tetrahydrocannabinol) is the chief intoxicant chemical and predominates in intoxicant strains, while the isomer D8-THC is usually present in no more than trace amounts. CBD (cannabidiol) is the chief non-intoxicant chemical, and predominates in non-intoxicant strains; it has sedative effects. The non-intoxicant CBN (cannabinol) is a frequent degradation or oxidation product. The non-intoxicant cannabichromene (CBC) is typically found in trace amounts in intoxicant strains. The non-intoxicant cannabigerol (CBG) is considered to be a precursor of the other cannbinoids (see Fig. 10).
Traditionally, hemp fiber has been a very coarse fiber when raw, which made it well suited to rope but less than ideal for clothing designed to be worn against delicate human skin. Advances in breeding of the plants and treatment/processing of the fibers have resulted in a much finer, softer hemp fiber, which is ideal for weaving into hemp clothing, fabrics and rope. Watch the video on Hemp for victory to learn more about the importance of hemp during war times.
So-called “pure hybrids,” while oxymoronic in name, indicate marijuana strains that are believed to offer a perfect blend or balance of sativa’s energizing and indica’s sedating effects. Other hybrid strains of cannabis tend to place the emphasis on one end of the spectrum or the other. These are called “sativa-dominant” or “indica-dominant,” accordingly.
The Hemp Industries Association (HIA) is a non-profit trade association representing more than one-thousand (1,000) supporters, farmers and business members serving the hemp industries since 1994. The hemp industries are primed to once again become a major global economic force as a result of new applications and opportunities that are in demand. Hemp is a sustainable choice for industrial products, textiles, and also offer exceptional ingredients and components for nutrition and wellness products. Hemp is one of our planet's most important natural resources, and we advocate for the whole plant.
Great pain reliever! The muscles surrounding my right hip get very tense and tight, causing me pain when I walk or sleep on it. Stretching, massage, and OTC pills only provide minimal and short lasting relief. So my boss bought me the intensive cream and the relief has lasted hours! You have to put a generous amount on the troubled area but it works like a charm! I’m so glad CBD is finally legal in a Texas.
Prosecutors have told the Statesman that even if the cargo in an Oregon semitrailer seized in late January by Idaho State Police turns out to be hemp and not marijuana — as the owners of the cargo say a judge found in a ruling denying the truck’s release — it’s still a violation of state drug laws. The driver is facing a felony drug trafficking charge.
Many dog owners are already making their dog treat. They personalize it according to their pet’s likes and favorites. Pet owners can also infuse the CBD compound into their homemade cbd treats for dogs. In this way, their dogs will enjoy their food while ingesting the cannabidiol compound. Homemade CBD treats are made by merely adding CBD oil supplements to your dog treat recipe. Each 1-ounce bottle of CBD oil supplement contains 100 mg of CBD while a container of 2-ounce includes 500 mg of CBD. Another good thing about making homemade CBD dog treat is that the dosage of CBD compound given to your dog is controlled and regulated. In that way, you can track his consumption, and you can adjust the dosage according to the effect of the dog treat to your dog.
However, because no tools existed for quality control, it was impossible to prepare a standardized medicine, so patients often received a dose that was either too low, having no effect, or too high, resulting in serious side effects. Moreover, Cannabis extract was not water-soluble and therefore could not be injected (in contrast to, e.g., the opiates), whereas oral administration was found to be unreliable because of its slow and erratic absorption. Because of such drawbacks, the medicinal use of Cannabis increasingly disappeared in the beginning of the twentieth century, and in 1937 Cannabis was removed from the US pharmacopoeia, a move that was followed by most other Western countries.27 Isolation and structure elucidation of the first pure active substances from Cannabis was not achieved until the 1960s.29
Outside of the aforementioned studies, CBD’s progress toward its place in society today suffered from intermittent spurts and starts until 1996 when California became the first US state to legalize medical cannabis. This groundbreaking moment paved the way for public support and lucrative research opportunities. Other states including Oregon, Alaska, Washington, Maine, Hawaii, Nevada, and Colorado would follow suit before the close of 2000.
It often takes 10 to 15 years for the industry associated with a new agricultural crop to mature. While it is true that foreign imports have been the basis for hemp products in North America for at least a decade, North American production is only 4 years of age in Canada, and farming of hemp in the US has not even begun. Viewed from this perspective, the hemp industry in North America is still very much in its infancy. Varieties of hemp specifically suited to given products and regions have only started to be developed in North America. There is considerable uncertainty regarding yields, costs of production, harvesting and processing equipment, product characteristics, foreign competition, governmental support, and the vagaries of the regulatory environment. Hemp is not presently a standard crop, and is likely to continue experiencing the risks inherent in a small niche market for some time. Hemp is currently a most uncertain crop, but has such a diversity of possible uses, is being promoted by extremely enthusiastic market developers, and attracts so much attention that it is likely to carve out a much larger share of the North American marketplace than its detractors are willing to concede.
Cannabis plants produce a unique family of terpeno-phenolic compounds called cannabinoids, some of which produce the "high" which may be experienced from consuming marijuana. There are 483 identifiable chemical constituents known to exist in the cannabis plant, and at least 85 different cannabinoids have been isolated from the plant. The two cannabinoids usually produced in greatest abundance are cannabidiol (CBD) and/or Δ9-tetrahydrocannabinol (THC), but only THC is psychoactive. Since the early 1970s, Cannabis plants have been categorized by their chemical phenotype or "chemotype", based on the overall amount of THC produced, and on the ratio of THC to CBD. Although overall cannabinoid production is influenced by environmental factors, the THC/CBD ratio is genetically determined and remains fixed throughout the life of a plant. Non-drug plants produce relatively low levels of THC and high levels of CBD, while drug plants produce high levels of THC and low levels of CBD. When plants of these two chemotypes cross-pollinate, the plants in the first filial (F1) generation have an intermediate chemotype and produce intermedite amounts of CBD and THC. Female plants of this chemotype may produce enough THC to be utilized for drug production.
Currently available for purchase online, Smart Hemp CBD products include topical balms; soft bites and chews for dogs; gel capsules that can be mixed with food or wrapped inside a treat; powdered hemp meal supplements that can be mixed with food; tinctures that can be administered under a pet's tongue or by mixing it with food; and hemp meal pellets for horses.
CBD Oil refers to CBD-infused products that contain CBD suspended in an oily base, such as vegetable glycerin, hempseed oil, or another plant-derived oil. Sublingual oils are ideal because they allow for rapid absorption of CBD through the membrane under your tongue directly into your bloodstream. CBD Oils are available in both low and high doses, and droppers built into the cap make it easy to measure your proper dose. CBD Oils are the most popular kind of CBD product thanks to their ease of use and rapid effects.
Plastic composites for automobiles are the second most important component of the hemp industry of the EU. Natural fibers in automobile composites are used primarily in press-molded parts (Fig. 18). There are two widespread technologies. In thermoplastic production, natural fibers are blended with polypropylene fibers and formed into a mat, which is pressed under heat into the desired form. In thermoset production the natural fibers are soaked with binders such as epoxy resin or polyurethane, placed in the desired form, and allowed to harden through polymerization. Hemp has also been used in other types of thermoplastic applications, including injection molding. The characteristics of hemp fibers have proven to be superior for production of molded composites. In European manufacturing of cars, natural fibers are used to reinforce door panels, passenger rear decks, trunk linings, and pillars. In 1999 over 20,000 t of natural fiber were used for these purposes in Europe, including about, 2,000 t of hemp. It has been estimated that 5–10 kg of natural fibers can be used in the molded portions of an average automobile (excluding upholstery). The demand for automobile applications of hemp is expected to increase considerably, depending on the development of new technologies (Karus et al. 2000).
Children:A prescription cannabidiol product (Epidiolex) is POSSIBLY SAFE when taken by mouth daily. The most common dose used is 10 mg/kg daily. Higher doses of 15-20 mg/kg daily may be used in some children, but these higher doses are more likely to cause side effects. This product is approved for use in certain children 2 year of age and older, but has been used in children as young as 1 year of age.
A colleague of Mechoulam’s, Marc Feldman at Imperial College, London, tested CBD on mice that had a version of rheumatoid arthritis. He found that CBD reduced the mice’s inflammation by 50% at the right dosage. Cardiologists working with the mice at Hebrew University have found that a dosage of CBD immediately following a heart attack can reduce infarct size by about 66%.
Marijuana has in fact been grown for medicinal research in North America by both the Canadian (Fig. 40) and American governments, and this will likely continue. The possibility of marijuana becoming a legal commercial crop in North America is, to say the least, unlikely in the foreseeable future. Nevertheless the private sector is currently producing medicinal marijuana in Europe and Canada, so the following orientation to marijuana as a potential authorized crop is not merely academic.
The high lipid-solubility of cannabinoids results in their persisting in the body for long periods of time. Even after a single administration of THC, detectable levels of THC can be found in the body for weeks or longer (depending on the amount administered and the sensitivity of the assessment method). A number of investigators have suggested that this is an important factor in marijuana's effects, perhaps because cannabinoids may accumulate in the body, particularly in the lipid membranes of neurons.
“Industrial hemp, along with all strains of cannabis, are decades behind other agricultural crops in terms of improved plant genetics,” said Arcadia Chief Financial Officer Matt Plavan. “With the explosive market growth projected in the industrial hemp and derivative markets, growers will need the very best hemp strains to meet demand, minimize waste, and ensure consistent quality.”
According to researchers, 25 percent of all cancer patients use medical marijuana. Cancer patients are finding relief from medical cannabis. And they want to know more about it. Research conducted at St. George’s University of London, found the two most common cannabinoids in marijuana, tetrahydrocannabinol (THC) and cannabidiol (CBD), weakened the ferocity of cancer cells and made them more susceptible to radiation treatment. Other studies have shown that medical marijuana treatments can slow the growth of cancer cells and halt their spread to other parts of the body.
It’s a proven fact that all mammals, people and pet’s alike, have an Endocannabinoid System. That means that your pet can enjoy the same amazing healing properties of CBD just as people do. The Endocannabinoid System is a huge network comprised of many cannabinoid receptors located throughout the body. This crucial system is used by the body to help maintain homeostasis.
If you think that your dog might benefit from CBD oil and it is legal for use in your area, give your vet a call or contact a holistic veterinarian. Although some vets are reluctant to recommend CBD treatment, many more are seeing the undeniable benefits of CBD and will approve its use when appropriate. Make sure to consult with a professional either way, and follow safe dosage administration when giving CBD to dogs.
Deeper pockets are also helping them to dominate CBD products—derived from cannabis but without a high—that are of interest to some of the world’s biggest consumer companies, including... — Carol Ryan, WSJ, "U.S. Cannabis Law Is Helping Canada Make Hay," 27 Feb. 2019 Meanwhile, 10 states and Washington, DC, have legalized the intoxicating form of cannabis for recreational purposes, while 32 states have for medical uses. — German Lopez, Vox, "Trump and Congress just legalized hemp," 20 Dec. 2018 The state’s Cannabis Control Commission has since granted one dispensary a provisional retail license, and another company licenses to grow and transport non-medical cannabis. — Matthew Ormseth, courant.com, "U.S. Attorney in Massachusetts Says Opioids, Not Marijuana, A Priority As State Readies Retail Market," 10 July 2018 The city's mayor Alex Morse believes Holyoke is the ideal location for the cannabis industry in Massachusetts -- and possibly the country. — CBS News, "Holyoke, Massachusetts, is ready to welcome the marijuana industry with open arms," 30 June 2018 Rat offspring exposed to THC — tetrahydrocannabinol, the chief psychoactive ingredient in cannabis — and others that were not had to learn how to press one of two levers to get a sugar pellet reward. — Erik Lacitis, The Seattle Times, "‘Something wasn’t clicking’: WSU study shows offspring of pregnant rats exposed to THC have impaired development," 20 Nov. 2018 It's also derived from cannabidiol (CBD), one of the major compounds found in cannabis. — Sarah Jacoby, SELF, "Updated: What You Need to Know About Epidiolex, the First FDA-Approved Drug Made From Cannabis," 1 Nov. 2018 Attendees must bring their own cannabis, but smoking, edibles, and vaping are all encouraged as part of the creative process and the social experience. — Sarah Shemkus, BostonGlobe.com, "5 marijuana-infused things to do in New England," 21 June 2018 But Salmonella can also turn up in unexpected places — like in tahini, or on cantaloupes, or even drugs like cannabis and kratom. — Rachel Becker, The Verge, "Machine learning could help figure out what pooped on your produce," 12 Dec. 2018
Some states only allow for products infused with CBD, some only allow for high-CBD and low-THC products, while others allow both THC and CBD. To further confuse the American citizenry, some states permit patients the use of CBD, but require that they travel to another state to purchase it. To make sense of this confounding patchwork and to learn about each individual state’s CBD laws, read the Weedmaps Laws and Regulations page. Go Here For Cannabis CBD
Am not lying when I say I literally found this little cream on the floor one day, like it fell from heaven! As a cocktail server at a casino you can only imagine what this did to me. My entire legs ,feet ,toes and back love this and I could not be happier w it. Applied it this morning because my feet were so sore ,I atomically fell asleep w no pain and woke up to no pain . I love this product and I will be buying endless products , much needed! Loooooove your topical cream!
While marijuana cultivation requires ample spacing to reduce the risk of mold or bacteria, hemp can be planted more densely. Most marijuana crops are planted at one (1) plant per four (4) square feet. Hemp plants that are grown for hemp oil are planted at roughly 40 to 60 plants per four (4) square feet. Hemp plants grown for fiber are even more densely planted at a rate of about 100 to 120 plants per four (4) square feet.
^ Juliet Eilperin (February 11, 2013), "'Good seed' versus 'evil weed': Hemp activists eye legalization", The Washington Post – via The Japan Times Online, [A] couple of factors — the high taxes the federal government imposed on growing hemp in the late 1930s and again in the early '50s, and then the DEA's interpretation of the 1970 law — made producing hemp nearly impossible. Since the DEA only grants permits in rare instances and demands costly, elaborate security precautions, large-scale hemp growing in the United States is not viable.